Do you install pallet rack in Altamonte Springs?

Yes. We handle design, supply of new material, and installation by experienced installation crews we schedule and manage. The system is anchored to the floor and fitted with load plaques for the approved configuration.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

What determines the price of pallet rack in Altamonte Springs?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

How much weight can pallet rack hold?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

Will new rack match the racking I already have?

Usually, if the connections match, but teardrop is not universal across manufacturers. Send photos of the upright face, beam connector, and any manufacturer label so we can match new components to your system before quoting the addition.

Cantilever Rack system inside a Florida warehouse

Altamonte Springs, Florida

Cantilever Rack in Altamonte Springs, FL

Name: Orlando Warehouse Racking - Altamonte Springs
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

Long material taking up floor space because standard racks will not hold it shows up constantly in the Cranes Roost area facilities. Adding cantilever rack is how an Altamonte Springs operation gets capacity back without paying for square footage it already has.

Because this system is about arm length and capacity set by the bundles you handle, we start with the storage math for your Altamonte Springs footprint — how many positions it can carry and what that does to travel time — then send a CAD layout and an itemized quote before anything is ordered. Call (407) 743-8726 and tell us what you are storing in Altamonte Springs.

(407) 743-8726

Why Altamonte Springs Warehouses Work With Us

The industrial stock near the SR-436 corridor ranges from older infill space to newer construction, and each one limits a racking plan differently. Height, columns, and floor condition all move the answer in Altamonte Springs.

Cantilever Rack suits Altamonte Springs buildings for one reason — single-sided runs along the wall, double-sided in open floor — which matters more here than in a newer big-box facility built around one uniform layout. We talk through that fit during a free design consult before you commit to steel for Altamonte Springs.

And you deal with one team throughout — cantilever rack layout, pricing, delivery windows into the SR-436 corridor, installation scheduling, and future additions. Nothing about the Altamonte Springs job gets handed to a call center.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the SR-436 corridor, the Douglas Avenue industrial zone, the Cranes Roost area.

Medical supply

E-commerce fulfillment

Commercial distribution

Service parts

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

We start by understanding the medical supply side of your operation — pallet profile, equipment, clear height, SKU count, throughput — because those inputs decide cantilever rack capacity in a SR-436 corridor building long before steel is quoted.

You then get a cantilever rack position count for the Altamonte Springs footprint, load ratings for every beam level, and pricing broken out by component, so cost per pallet position is visible rather than buried in a lump sum. Where it makes sense we run the same plan a second way, with single-sided runs along the wall, double-sided in open floor.

Cantilever Rack delivery into Altamonte Springs is coordinated around your schedule, and experienced installation crews we schedule and manage build to the approved drawing with every frame anchored to the floor, and confirm the system performs loaded before turning it over. The job is phased so your Altamonte Springs operation keeps running, and teardown, reconfiguration, or adding a lane later is handled by the same team.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Cantilever Rack Quote for Your Altamonte Springs Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.