What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

What determines the price of pallet rack in Kissimmee?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

How much weight can pallet rack hold?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

Will new rack match the racking I already have?

Usually, if the connections match, but teardrop is not universal across manufacturers. Send photos of the upright face, beam connector, and any manufacturer label so we can match new components to your system before quoting the addition.

Do you install pallet rack in Kissimmee?

Yes. We handle design, supply of new material, and installation by experienced installation crews we schedule and manage. The system is anchored to the floor and fitted with load plaques for the approved configuration.

Cantilever Rack system inside a Florida warehouse

Kissimmee, Florida

Cantilever Pallet Rack in Kissimmee, Florida

Name: Orlando Warehouse Racking - Kissimmee
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

A lot of the calls we get from Kissimmee start with bundle lengths that do not fit a standard pallet rack bay. Cantilever pallet rack usually fixes it, because it changes how much of a Poinciana floor plate is actually available to store product without moving a wall.

With single-sided runs along the wall, double-sided in open floor on the table, the food service distribution operations we work with near Poinciana usually want cost per pallet position, not a lump sum. That is what the cantilever rack layout and itemized quote for a Poinciana building show. Call (407) 743-8726 to start one for Kissimmee.

(407) 743-8726

Why Kissimmee Warehouses Work With Us

The industrial stock near the US-192 corridor ranges from older infill space to newer construction, and each one limits a racking plan differently. Height, columns, and floor condition all move the answer in Kissimmee.

Cantilever Rack suits Kissimmee buildings for one reason — long material off the floor and back into usable positions — which matters more here than in a newer big-box facility built around one uniform layout. We talk through that fit during a free design consult before you commit to steel for Kissimmee.

Service does not stop at handoff on a Kissimmee job either. If a cantilever rack level needs to move in your Poinciana building or you need additional positions, the same team that designed the system answers the phone.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the US-192 corridor, Poinciana, Buenaventura Lakes, the Osceola Heritage Park area.

Hospitality supply

Food service distribution

3PL and warehousing

Building products

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

We start by understanding the hospitality supply side of your operation — pallet profile, equipment, clear height, SKU count, throughput — because those inputs decide cantilever rack capacity in a US-192 corridor building long before steel is quoted.

Then you get the cantilever rack drawing for your US-192 corridor building: pallet positions, beam or rail elevations, aisle centerlines, and total capacity, priced line by line with beam capacity noted at every level. We often show two versions of the same Kissimmee floor plan — long material off the floor and back into usable positions — so you compare storage against throughput before choosing.

Lead time for new cantilever rack components is confirmed on your quote, and we time drops to your Kissimmee shift schedule instead of one large delivery. Experienced installation crews we schedule and manage install the system anchored to the floor and aligned to the drawing, tag every bay with its capacity, and work around your food service distribution production hours. The Kissimmee layout stays on file for the next expansion.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Cantilever Rack Quote for Your Kissimmee Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.