What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

How much aisle space does my forklift need?

Aisle width is set by the lift truck: counterbalance trucks generally need about 12–13 feet, reach trucks about 8–10 feet, and very-narrow-aisle trucks about 5–6 feet. We confirm the truck specifications and load dimensions before drawing aisles, because aisle width drives storage density more than almost anything else.

How many pallet positions fit in my warehouse?

The count depends on clear height, aisle width, and the forklift you operate. Our free CAD layout gives you the exact position count for the proposed configuration before you buy, using your building dimensions and actual pallets.

How do you size rack capacity for my loads?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

What determines the price of pallet rack in Kissimmee?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

Drive-In Rack system inside a Florida warehouse

Kissimmee, Florida

Drive-In Rack for Kissimmee, Florida Warehouses

Name: Orlando Warehouse Racking - Kissimmee
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

Most hospitality supply and food service distribution operations in Kissimmee outgrow the layout before they outgrow the building, usually starting with a tourism-driven peak season that doubles pallet counts for four months of the year. Drive-In Rack is the system we reach for when the floor is full but the air above Poinciana racks is not.

We take the pallet weights, lift truck, and usable height from your Buenaventura Lakes site, weigh it against bulk SKUs held deep while the pick face stays selective, and come back with a drawing, a position count, and a priced bill of material. Call (407) 743-8726.

(407) 743-8726

Why Kissimmee Warehouses Work With Us

Buildings around the US-192 corridor and Poinciana are rarely uniform. Column spacing, dock aprons, and usable height differ enough from one Kissimmee site to the next that a layout copied from another building wastes positions.

That is part of why drive-in rack fits Kissimmee operations: the highest density available for a small number of SKUs. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a US-192 corridor footprint.

Clear coordination matters on a Kissimmee project: scheduled freight, a direct answer on a drive-in rack revision, and one contact for planning future positions.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include the US-192 corridor, Poinciana, Buenaventura Lakes, the Osceola Heritage Park area.

Hospitality supply

Food service distribution

3PL and warehousing

Building products

How Drive-In Rack Works

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, to help protect the structure from forklift contact.

What a Drive-In Rack Project Includes

A drive-in rack quote for Kissimmee starts from measurements, not assumptions — clear height, column spacing, dock access, pallet weights, and which SKUs turn daily versus monthly.

From there our design team produces a CAD drive-in rack layout showing positions, elevations, and aisle widths for your Kissimmee floor plan, plus an itemized quote so you see cost per pallet position. Where it helps, we price a second configuration on the same plan, with the highest density available for a small number of SKUs, so the tradeoff between density and access is a number instead of an opinion. Load ratings for each drive-in rack level are documented in the Kissimmee drawing, not guessed in the field.

New drive-in rack components are priced with a confirmed lead time, and we stage deliveries to match your US-192 corridor dock. Experienced installation crews we schedule and manage set the system according to the Kissimmee drawing, anchored to the floor, verify it loaded, and tag capacities. Work is sequenced zone by zone so Kissimmee receiving and shipping never stop, and we stay reachable for drive-in rack layout revisions and added lanes.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Drive-In Rack Quote for Your Kissimmee Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.