How much weight can pallet rack hold?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

What determines the price of pallet rack in Orlando?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

How much aisle space does my forklift need?

Aisle width is set by the lift truck: counterbalance trucks generally need about 12–13 feet, reach trucks about 8–10 feet, and very-narrow-aisle trucks about 5–6 feet. We confirm the truck specifications and load dimensions before drawing aisles, because aisle width drives storage density more than almost anything else.

How many pallet positions fit in my warehouse?

The count depends on clear height, aisle width, and the forklift you operate. Our free CAD layout gives you the exact position count for the proposed configuration before you buy, using your building dimensions and actual pallets.

Drive-In Rack system inside a Florida warehouse

Orlando, Florida

Drive-In Rack Systems in Orlando, FL

Name: Orlando Warehouse Racking - Orlando
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

If your Orlando operation is dealing with seasonal inventory that swallows floor space three months a year, that is a storage design problem, not a leasing problem. Drive-In Rack is built for exactly that situation — it turns the unused clear height in a 528 corridor building into working pallet positions instead of aisle.

We size the drive-in rack around your pallets, your lift trucks, and the clear height in your 528 corridor building, factoring in aisles traded for lanes to push positions per square foot. You get a drawing and a line-item price for the 528 corridor site, not a rough estimate. Call (407) 743-8726 and we will start an Orlando layout.

(407) 743-8726

Why Orlando Warehouses Work With Us

Buildings around the 528 corridor and Airport South are rarely uniform. Column spacing, dock aprons, and usable height differ enough from one Orlando site to the next that a layout copied from another building wastes positions.

That is part of why drive-in rack fits Orlando operations: lane dimensions drawn around your specific lift truck. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a 528 corridor footprint.

We also keep the Orlando drive-in rack layout on file, so adding a bay next year or extending a row does not start from scratch.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include the 528 corridor, Airport South, Millenia, the John Young Parkway industrial district.

Theme park and hospitality supply

E-commerce fulfillment

Food and beverage distribution

3PL and warehousing

How Drive-In Rack Works

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, to help protect the structure from forklift contact.

What a Drive-In Rack Project Includes

The first step is a working list of what has to fit in your Orlando space: pallet sizes, heaviest load, forklift reach, and how many SKUs need direct access versus drive-in rack depth.

From there our design team produces a CAD drive-in rack layout showing positions, elevations, and aisle widths for your Orlando floor plan, plus an itemized quote so you see cost per pallet position. Where it helps, we price a second configuration on the same plan, with lane dimensions drawn around your specific lift truck, so the tradeoff between density and access is a number instead of an opinion. Load ratings for each drive-in rack level are documented in the Orlando drawing, not guessed in the field.

New drive-in rack components are priced with a confirmed lead time, and we stage deliveries to match your 528 corridor dock. Experienced installation crews we schedule and manage set the system according to the Orlando drawing, anchored to the floor, verify it loaded, and tag capacities. Work is sequenced zone by zone so Orlando receiving and shipping never stop, and we stay reachable for drive-in rack layout revisions and added lanes.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Drive-In Rack Quote for Your Orlando Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.