What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

What determines the price of pallet rack in Ocala?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

How much weight can pallet rack hold?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

Will new rack match the racking I already have?

Usually, if the connections match, but teardrop is not universal across manufacturers. Send photos of the upright face, beam connector, and any manufacturer label so we can match new components to your system before quoting the addition.

Do you install pallet rack in Ocala?

Yes. We handle design, supply of new material, and installation by experienced installation crews we schedule and manage. The system is anchored to the floor and fitted with load plaques for the approved configuration.

Cantilever Rack system inside a Florida warehouse

Ocala, Florida

Cantilever Rack in Ocala, Florida

Name: Orlando Warehouse Racking - Ocala
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

Most agriculture and equine supply and light manufacturing operations in Ocala outgrow the layout before they outgrow the building, usually starting with a tourism-driven peak season that doubles pallet counts for four months of the year. Cantilever Rack is the system we reach for when the floor is full but the air above the SR-200 corridor racks is not.

We take the pallet weights, lift truck, and usable height from your NW Ocala industrial zone site, weigh it against arm length and capacity set by the bundles you handle, and come back with a drawing, a position count, and a priced bill of material. Call (407) 743-8726.

(407) 743-8726

Why Ocala Warehouses Work With Us

Ocala operators mixing agriculture and equine supply with light manufacturing usually need one part of the floor dense and another part fully selective. That split is exactly where cantilever rack tends to earn its keep near the NW Ocala industrial zone.

For i-75 distribution work near the NW Ocala industrial zone, the deciding factor is normally single-sided runs along the wall, double-sided in open floor. We put that in front of you during the free cantilever rack design consult, with Ocala position counts for both directions.

Clear coordination matters on a Ocala project: scheduled freight, a direct answer on a cantilever rack revision, and one contact for planning future positions.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the Ocala 489 Commerce Park area, the SR-200 corridor, the NW Ocala industrial zone.

Agriculture and equine supply

Light manufacturing

I-75 distribution

Building supply

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

Every Ocala cantilever rack project begins with the numbers: what you store, how heavy it is, what lifts it, and how tall the usable space is. That Ocala conversation happens over the phone and usually takes about fifteen minutes.

The deliverable is a cantilever rack drawing and a priced bill of material: positions, elevations, aisle widths, and capacities for your SR-200 corridor building. Since the design turns on single-sided runs along the wall, double-sided in open floor, we normally include a denser alternative on the same plan so the agriculture and equine supply tradeoff is explicit.

Cantilever Rack freight is staged to fit NW Ocala industrial zone access, and installation partners build the system exactly as drawn, then verify that the system is plumb and anchored to the floor, and check capacity tags. Phasing keeps your Ocala floor operating during the install, and the same team schedules and manages experienced installation crews for later additions or a relocation.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Cantilever Rack Quote for Your Ocala Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.