How much weight can pallet rack hold?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

Will new rack match the racking I already have?

Usually, if the connections match, but teardrop is not universal across manufacturers. Send photos of the upright face, beam connector, and any manufacturer label so we can match new components to your system before quoting the addition.

Do you install pallet rack in Lakeland?

Yes. We handle design, supply of new material, and installation by experienced installation crews we schedule and manage. The system is anchored to the floor and fitted with load plaques for the approved configuration.

Which rack system fits my inventory?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

What determines the price of pallet rack in Lakeland?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

Cantilever Rack system inside a Florida warehouse

Lakeland, Florida

Cantilever Rack Layouts for Lakeland, FL

Name: Orlando Warehouse Racking - Lakeland
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

A lot of the calls we get from Lakeland start with a 3PL and manufacturing operation splitting one floor and never having enough of either. Cantilever rack usually fixes it, because it changes how much of a Interstate Commerce Park area floor plate is actually available to store product without moving a wall.

With arm length and capacity set by the bundles you handle on the table, the 3pl and contract warehousing operations we work with near the Interstate Commerce Park area usually want cost per pallet position, not a lump sum. That is what the cantilever rack layout and itemized quote for a Interstate Commerce Park area building show. Call (407) 743-8726 to start one for Lakeland.

(407) 743-8726

Why Lakeland Warehouses Work With Us

The industrial stock near County Line Road ranges from older infill space to newer construction, and each one limits a racking plan differently. Height, columns, and floor condition all move the answer in Lakeland.

Since 1997 we have supplied grocery and food distribution, 3pl and contract warehousing, and 3PL operations across Lakeland and the surrounding area through Warehouse Equipment & Supplies Co. The consult up front, where we talk through single-sided runs along the wall, double-sided in open floor, is why the first layout is usually close to the final one.

One number reaches the people who did the work, whether that is a cantilever rack revision during design or an added row for a Kathleen Road site as your operation grows.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include County Line Road, the Interstate Commerce Park area, Kathleen Road.

Grocery and food distribution

3PL and contract warehousing

E-commerce fulfillment

Packaging

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

We start by understanding the grocery and food distribution side of your operation — pallet profile, equipment, clear height, SKU count, throughput — because those inputs decide cantilever rack capacity in a County Line Road building long before steel is quoted.

Next comes the cantilever rack layout itself — every position counted, every level rated, and the Lakeland quote itemized by frame, beam, deck, and accessory. Because single-sided runs along the wall, double-sided in open floor changes the math, a second configuration on the same floor plan usually comes with it for comparison.

Cantilever Rack delivery into Lakeland is coordinated around your schedule, and experienced installation crews we schedule and manage build to the approved drawing with every frame anchored to the floor, and confirm the system performs loaded before turning it over. The job is phased so your Lakeland operation keeps running, and teardown, reconfiguration, or adding a lane later is handled by the same team.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Cantilever Rack Quote for Your Lakeland Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.