What determines the price of pallet rack in Altamonte Springs?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

How much aisle space does my forklift need?

Aisle width is set by the lift truck: counterbalance trucks generally need about 12–13 feet, reach trucks about 8–10 feet, and very-narrow-aisle trucks about 5–6 feet. We confirm the truck specifications and load dimensions before drawing aisles, because aisle width drives storage density more than almost anything else.

How many pallet positions fit in my warehouse?

The count depends on clear height, aisle width, and the forklift you operate. Our free CAD layout gives you the exact position count for the proposed configuration before you buy, using your building dimensions and actual pallets.

How do you size rack capacity for my loads?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

Drive-In Rack system inside a Florida warehouse

Altamonte Springs, Florida

Drive-In Rack Layouts for Altamonte Springs, FL

Name: Orlando Warehouse Racking - Altamonte Springs
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

Seasonal inventory that swallows floor space three months a year is the most common reason Altamonte Springs warehouses call us. Drive-In Rack addresses that directly, reclaiming the positions a typical medical supply layout in this market never uses.

We size the drive-in pallet rack around your pallets, your lift trucks, and the clear height in your SR-436 corridor building, factoring in lane dimensions drawn around your specific lift truck. You get a drawing and a line-item price for the SR-436 corridor site, not a rough estimate. Call (407) 743-8726 and we will start an Altamonte Springs layout.

(407) 743-8726

Why Altamonte Springs Warehouses Work With Us

Buildings around the SR-436 corridor and the Douglas Avenue industrial zone are rarely uniform. Column spacing, dock aprons, and usable height differ enough from one Altamonte Springs site to the next that a layout copied from another building wastes positions.

That is part of why drive-in rack fits Altamonte Springs operations: bulk SKUs held deep while the pick face stays selective. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a SR-436 corridor footprint.

You also get one point of contact for the whole Altamonte Springs drive-in rack project. The same person who draws the layout quotes the steel, schedules delivery around your SR-436 corridor dock, and plans added positions when your inventory grows.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include the SR-436 corridor, the Douglas Avenue industrial zone, the Cranes Roost area.

Medical supply

E-commerce fulfillment

Commercial distribution

Service parts

How Drive-In Rack Works

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, to help protect the structure from forklift contact.

What a Drive-In Rack Project Includes

A drive-in rack quote for Altamonte Springs starts from measurements, not assumptions — clear height, column spacing, dock access, pallet weights, and which SKUs turn daily versus monthly.

The deliverable is a drive-in rack drawing and a priced bill of material: positions, elevations, aisle widths, and capacities for your Douglas Avenue industrial zone building. Since the design turns on bulk SKUs held deep while the pick face stays selective, we normally include a denser alternative on the same plan so the medical supply tradeoff is explicit.

Drive-In Rack freight is staged to fit Cranes Roost area access, and installation partners build the system exactly as drawn, then verify that the system is plumb and anchored to the floor, and check capacity tags. Phasing keeps your Altamonte Springs floor operating during the install, and the same team schedules and manages experienced installation crews for later additions or a relocation.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Drive-In Rack Quote for Your Altamonte Springs Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.