How much aisle space does my forklift need?

Aisle width is set by the lift truck: counterbalance trucks generally need about 12–13 feet, reach trucks about 8–10 feet, and very-narrow-aisle trucks about 5–6 feet. We confirm the truck specifications and load dimensions before drawing aisles, because aisle width drives storage density more than almost anything else.

How many pallet positions fit in my warehouse?

The count depends on clear height, aisle width, and the forklift you operate. Our free CAD layout gives you the exact position count for the proposed configuration before you buy, using your building dimensions and actual pallets.

How do you size rack capacity for my loads?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

What determines the price of pallet rack in Winter Haven?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

Which rack system fits my inventory?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

Drive-In Rack system inside a Florida warehouse

Winter Haven, Florida

Drive-In Rack in Winter Haven, FL

Name: Orlando Warehouse Racking - Winter Haven
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

Too many aisles for the number of SKUs you actually carry shows up constantly in the SR-540 corridor facilities. Adding drive-in pallet rack is how a Winter Haven operation gets capacity back without paying for square footage it already has.

Given the value of lane dimensions drawn around your specific lift truck, we model this against a second configuration on the same Winter Haven floor plan so density and access are numbers you can compare. Free to see, no obligation to order, and the drive-in rack numbers are yours either way. Call (407) 743-8726 about your CSX intermodal area building.

(407) 743-8726

Why Winter Haven Warehouses Work With Us

What limits storage in a SR-540 corridor facility is usually structural — a column line in the wrong place, a beam pocket, a tight aisle. We work those Winter Haven constraints out on paper before quoting steel.

We have been laying out drive-in rack for intermodal logistics and citrus and food processing operations in the Winter Haven market as part of Warehouse Equipment & Supplies Co. since 1997, and bulk SKUs held deep while the pick face stays selective is the drive-in rack fit question we work through with your Winter Haven team before quoting.

One number reaches the people who did the work, whether that is a drive-in rack revision during design or an added row for a SR-540 corridor site as your operation grows.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include the CSX intermodal area, Havendale Boulevard, the SR-540 corridor.

Intermodal logistics

Citrus and food processing

Cold storage

Regional distribution

How Drive-In Rack Works

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, to help protect the structure from forklift contact.

What a Drive-In Rack Project Includes

Before drive-in rack is priced for a Havendale Boulevard site, we collect the constraints: usable height, column grid, aisle widths your lifts need, and the pallet mix your citrus and food processing volume actually moves.

Then you get the drive-in rack drawing for your CSX intermodal area building: pallet positions, beam or rail elevations, aisle centerlines, and total capacity, priced line by line with beam capacity noted at every level. We often show two versions of the same Winter Haven floor plan — bulk SKUs held deep while the pick face stays selective — so you compare storage against throughput before choosing.

Drive-In Rack delivery into Winter Haven is coordinated around your schedule, and experienced installation crews we schedule and manage build to the approved drawing with every frame anchored to the floor, and confirm the system performs loaded before turning it over. The job is phased so your Winter Haven operation keeps running, and teardown, reconfiguration, or adding a lane later is handled by the same team.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Drive-In Rack Quote for Your Winter Haven Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.