Do you install pallet rack in St. Cloud?

Yes. We handle design, supply of new material, and installation by experienced installation crews we schedule and manage. The system is anchored to the floor and fitted with load plaques for the approved configuration.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

What determines the price of pallet rack in St. Cloud?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

How much weight can pallet rack hold?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

Will new rack match the racking I already have?

Usually, if the connections match, but teardrop is not universal across manufacturers. Send photos of the upright face, beam connector, and any manufacturer label so we can match new components to your system before quoting the addition.

Cantilever Rack system inside a Florida warehouse

St. Cloud, Florida

Cantilever Rack for St. Cloud, Florida Warehouses

Name: Orlando Warehouse Racking - St. Cloud
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

Warehouses near the Old Canoe Creek Road area keep hitting the same wall: long material taking up floor space because standard racks will not hold it. Cantilever pallet rack is one of the more direct ways for a St. Cloud building to add capacity without touching the envelope.

Because this system is about arms repositioned as your product lengths change, we start with the storage math for your St. Cloud footprint — how many positions it can carry and what that does to travel time — then send a CAD layout and an itemized quote before anything is ordered. Call (407) 743-8726 and tell us what you are storing in St. Cloud.

(407) 743-8726

Why St. Cloud Warehouses Work With Us

The industrial stock near the Old Canoe Creek Road area ranges from older infill space to newer construction, and each one limits a racking plan differently. Height, columns, and floor condition all move the answer in St. Cloud.

Since 1997 we have supplied construction supply, food service distribution, and 3PL operations across St. Cloud and the surrounding area through Warehouse Equipment & Supplies Co. The consult up front, where we talk through arm length and capacity set by the bundles you handle, is why the first layout is usually close to the final one.

And you deal with one team throughout — cantilever rack layout, pricing, delivery windows into the Old Canoe Creek Road area, installation scheduling, and future additions. Nothing about the St. Cloud job gets handed to a call center.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the Old Canoe Creek Road area, the US-192 east corridor, the Narcoossee area.

Construction supply

Food service distribution

Mixed inventory

Light manufacturing

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

Before cantilever rack is priced for a US-192 east corridor site, we collect the constraints: usable height, column grid, aisle widths your lifts need, and the pallet mix your food service distribution volume actually moves.

Then you get the cantilever rack drawing for your Old Canoe Creek Road area building: pallet positions, beam or rail elevations, aisle centerlines, and total capacity, priced line by line with beam capacity noted at every level. We often show two versions of the same St. Cloud floor plan — arm length and capacity set by the bundles you handle — so you compare storage against throughput before choosing.

Lead time for new cantilever rack components is confirmed on your quote, and we time drops to your St. Cloud shift schedule instead of one large delivery. Experienced installation crews we schedule and manage install the system anchored to the floor and aligned to the drawing, tag every bay with its capacity, and work around your food service distribution production hours. The St. Cloud layout stays on file for the next expansion.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Cantilever Rack Quote for Your St. Cloud Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.