Can I add on to my existing pallet rack?

Usually, if the connections match, but teardrop is not universal across manufacturers. Send photos of the upright face, beam connector, and any manufacturer label so we can match new components to your system before quoting the addition.

Do you install pallet rack in Apopka?

Yes. We handle design, supply of new material, and installation by experienced installation crews we schedule and manage. The system is anchored to the floor and fitted with load plaques for the approved configuration.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

What determines the price of pallet rack in Apopka?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

How much weight can pallet rack hold?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

Cantilever Rack system inside a Florida warehouse

Apopka, Florida

Cantilever Rack for Apopka, Florida Warehouses

Name: Orlando Warehouse Racking - Apopka
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

Warehouses near the 429 corridor keep hitting the same wall: a 3PL and manufacturing operation splitting one floor and never having enough of either. Cantilever racking is one of the more direct ways for an Apopka building to add capacity without touching the envelope.

With arm length and capacity set by the bundles you handle on the table, the distribution operations we work with near the Ocoee-Apopka Road industrial zone usually want cost per pallet position, not a lump sum. That is what the cantilever rack layout and itemized quote for a Ocoee-Apopka Road industrial zone building show. Call (407) 743-8726 to start one for Apopka.

(407) 743-8726

Why Apopka Warehouses Work With Us

What limits storage in a Wekiva Springs area facility is usually structural — a column line in the wrong place, a beam pocket, a tight aisle. We work those Apopka constraints out on paper before quoting steel.

Cantilever Rack suits Apopka buildings for one reason — single-sided runs along the wall, double-sided in open floor — which matters more here than in a newer big-box facility built around one uniform layout. We talk through that fit during a free design consult before you commit to steel for Apopka.

And you deal with one team throughout — cantilever rack layout, pricing, delivery windows into the 429 corridor, installation scheduling, and future additions. Nothing about the Apopka job gets handed to a call center.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include the 429 corridor, the Ocoee-Apopka Road industrial zone, the Wekiva Springs area.

Foliage and nursery supply

Distribution

Light manufacturing

Construction supply

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

Before cantilever rack is priced for a Ocoee-Apopka Road industrial zone site, we collect the constraints: usable height, column grid, aisle widths your lifts need, and the pallet mix your distribution volume actually moves.

Next comes the cantilever rack layout itself — every position counted, every level rated, and the Apopka quote itemized by frame, beam, deck, and accessory. Because single-sided runs along the wall, double-sided in open floor changes the math, a second configuration on the same floor plan usually comes with it for comparison.

Lead time for new cantilever rack components is confirmed on your quote, and we time drops to your Apopka shift schedule instead of one large delivery. Experienced installation crews we schedule and manage install the system anchored to the floor and aligned to the drawing, tag every bay with its capacity, and work around your distribution production hours. The Apopka layout stays on file for the next expansion.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Cantilever Rack Quote for Your Apopka Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.