How many pallet positions fit in my warehouse?

The count depends on clear height, aisle width, and the forklift you operate. Our free CAD layout gives you the exact position count for the proposed configuration before you buy, using your building dimensions and actual pallets.

How do you size rack capacity for my loads?

There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration.

What determines the price of pallet rack in Ocoee?

Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material.

Which rack system fits my inventory?

Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order.

What aisle width do I need?

Aisle width is set by the lift truck: counterbalance trucks generally need about 12–13 feet, reach trucks about 8–10 feet, and very-narrow-aisle trucks about 5–6 feet. We confirm the truck specifications and load dimensions before drawing aisles, because aisle width drives storage density more than almost anything else.

Drive-In Rack system inside a Florida warehouse

Ocoee, Florida

Drive-Through Racking in Ocoee, Florida

Name: Orlando Warehouse Racking - Ocoee
Address: 5366 Central Florida Pkwy Unit #260, Orlando, FL, 32821, US
Telephone: (407) 743-8726
Price range: $$

Most distribution and light manufacturing operations in Ocoee outgrow the layout before they outgrow the building, usually starting with an older infill building with columns and clear height that do not match a catalog layout. Drive-In Rack is the system we reach for when the floor is full but the air above Ocoee-Apopka Road racks is not.

We start with your measurements — pallet profile, forklift, usable ceiling height — and because this system depends on bulk SKUs held deep while the pick face stays selective, then hand your Ocoee team a layout with a position count and an itemized quote. Call (407) 743-8726 with the pallet weights and we will size the drive-in rack for Ocoee.

(407) 743-8726

Why Ocoee Warehouses Work With Us

Warehouses in and around Ocoee-Apopka Road tend to be constrained by something specific: limited clear height, tight columns, or a dock that will not take a full truck at once. Those details decide an Ocoee design, not a standard drawing.

As part of Warehouse Equipment & Supplies Co., we have designed storage for distribution and food service operators around Ocoee-Apopka Road since 1997 — enough history that the highest density available for a small number of SKUs rarely surprises us mid-project.

Clear coordination matters on a Ocoee project: scheduled freight, a direct answer on a drive-in rack revision, and one contact for planning future positions.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include the 429 corridor, Ocoee-Apopka Road, the Silver Star Road industrial zone.

Distribution

Light manufacturing

Food service

Building products

How Drive-In Rack Works

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, to help protect the structure from forklift contact.

What a Drive-In Rack Project Includes

A drive-in rack quote for Ocoee starts from measurements, not assumptions — clear height, column spacing, dock access, pallet weights, and which SKUs turn daily versus monthly.

The deliverable is a drive-in rack drawing and a priced bill of material: positions, elevations, aisle widths, and capacities for your Ocoee-Apopka Road building. Since the design turns on the highest density available for a small number of SKUs, we normally include a denser alternative on the same plan so the distribution tradeoff is explicit.

Drive-In Rack freight is staged to fit Silver Star Road industrial zone access, and installation partners build the system exactly as drawn, then verify that the system is plumb and anchored to the floor, and check capacity tags. Phasing keeps your Ocoee floor operating during the install, and the same team schedules and manages experienced installation crews for later additions or a relocation.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (407) 743-8726

Recent Installations

Racking projects completed for warehouses across Central Florida.

View More Projects

Get a Drive-In Rack Quote for Your Ocoee Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726.

Orlando Warehouse Racking

5366 Central Florida Pkwy

Unit #260

Orlando, FL 32821

(407) 743-8726

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Dallas Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.