--- title: "Cantilever Rack | Greater Orlando" url: https://orlandowarehouseracking.com/products/cantilever-rack description: "Cantilever rack for lumber, pipe, and steel in Orlando. Arm length and spacing sized to your bundles, single or double sided. Call (407) 743-8726." lang: en --- Image: Cantilever Rack system in an industrial warehouse (https://orlandowarehouseracking.com/assets/cantilever-hero-3ef0AkpP.jpg) # Cantilever Rack Systems in Greater Orlando Cantilever rack exists because pallet rack has a front beam and long material doesn't care about pallets. Arms extend out from a column with no obstruction across the front, so lumber, pipe, tube, bar stock, sheet goods, and furniture load from the side and come off the same way, without lifting over anything. Choose it whenever product length, not weight or SKU count, is what's driving the storage problem - the alternative is usually leaning bundles against a wall or floor-stacking them where forklifts have to work around them. Arm length, capacity, and column spacing get set by the bundles you actually handle, not a generic length. We quote single-sided runs for a wall and double-sided runs for open floor, both with the layout attached so arm count and levels are settled before steel is ordered. (407) 743-8726 ## How Cantilever Rack Works 1 ### Columns and anchored bases Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick. 2 ### Arms at adjustable heights Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place. 3 ### Column spacing against sag Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly. 4 ### Single-sided or double-sided Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint. Image: Cantilever warehouse racking holding steel tubing (https://orlandowarehouseracking.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://orlandowarehouseracking.com/assets/cantilever-3b-HMeRbmPP.jpg) ## Where It Fits Best Lumber, plywood, and sheet goods Pipe, tube, conduit, and bar stock Steel service center inventory Furniture, doors, and windows Long or awkward loads currently sitting on the floor ## What We Need to Design It - What are the dimensions of the product being stored, length included? - What's the typical weight per bundle? - Straight arms or inclined arms - do you need lips to hold round stock? - Single-sided along a wall, or double-sided in open floor? - What's the clear height and the reach of your handling equipment? ## What a Project Includes Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs. From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out. The quote itemizes columns, bases, arms, bracing, and anchors, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Experienced installation crews we schedule and manage set bases anchored to the floor, plumb columns, brace the run, and set arm elevations to the drawing. The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space that long material used to occupy. 1 Phone consultation 2 CAD layout 3 Itemized quote 4 Delivery & installation ## Recent Installations A sample of racking projects completed across the region. Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/5274032f-71fc-48b4-8f62-40fa32cf9a93/project-1.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/c0b5a835-6cdc-4a73-b955-9ebfadfebeb8/project-2.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/abb99710-74a0-452b-97b6-abfb45b924fa/project-3.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/69946ffc-5678-489c-bb3d-44b1f5b59ac0/project-4.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/b37a0910-754d-466d-8d57-b838eb3f33d3/project-5.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/4bcaeeb6-015f-40f3-bba6-553ced3667ad/project-6.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/6049c52c-1dee-42ea-8b58-41d8394a61d2/project-7.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/1bf93a7d-febe-4a82-8756-eeb4056542a9/project-8.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/7ba42732-4817-4e1e-8c68-a0c4443a556c/project-9.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/de8eca78-8d97-40b7-a71b-bff76ce322b2/project-10.jpg) View More Projects: https://orlandowarehouseracking.com/projects ## Get a Cantilever Rack Quote Send the basics and we will come back with a layout and pricing. Prefer to talk? Call (407) 743-8726. ### What's Included: - Free warehouse consultation - CAD layout drawings - Itemized project quote - Rack type recommendations - Installation timeline ## Cantilever Rack Questions We Hear Most ### Can you supply and install the racking? ### What type of pallet rack do I need? ### What determines the price of pallet racking? ### How much weight can pallet rack hold? ### Will new rack match the racking I already have? ## Cantilever Rack by Service Area Delivery and installation across Central Florida. Orlando: https://orlandowarehouseracking.com/service-area/orlando/cantilever-rack Kissimmee: https://orlandowarehouseracking.com/service-area/kissimmee/cantilever-rack Sanford: https://orlandowarehouseracking.com/service-area/sanford/cantilever-rack Daytona Beach: https://orlandowarehouseracking.com/service-area/daytona-beach/cantilever-rack Lakeland: https://orlandowarehouseracking.com/service-area/lakeland/cantilever-rack Ocala: https://orlandowarehouseracking.com/service-area/ocala/cantilever-rack Melbourne: https://orlandowarehouseracking.com/service-area/melbourne/cantilever-rack Winter Haven: https://orlandowarehouseracking.com/service-area/winter-haven/cantilever-rack Apopka: https://orlandowarehouseracking.com/service-area/apopka/cantilever-rack Altamonte Springs: https://orlandowarehouseracking.com/service-area/altamonte-springs/cantilever-rack Winter Park: https://orlandowarehouseracking.com/service-area/winter-park/cantilever-rack Lake Mary: https://orlandowarehouseracking.com/service-area/lake-mary/cantilever-rack Clermont: https://orlandowarehouseracking.com/service-area/clermont/cantilever-rack Ocoee: https://orlandowarehouseracking.com/service-area/ocoee/cantilever-rack St. Cloud: https://orlandowarehouseracking.com/service-area/st-cloud/cantilever-rack ## Other Rack Systems We Supply ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. https://orlandowarehouseracking.com/products/pallet-rack ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. https://orlandowarehouseracking.com/products/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. https://orlandowarehouseracking.com/products/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. https://orlandowarehouseracking.com/products/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. https://orlandowarehouseracking.com/products/carton-flow-rack ## Where We Work Located in Orlando, we serve the entire Central Florida region with industrial pallet racks and warehouse storage solutions. Orlando Warehouse Racking 5366 Central Florida Pkwy Unit #260 Orlando, FL 32821 Get Directions → (https://www.google.com/maps/place/Orlando+Warehouse+Racking) ### Orlando Warehouse Racking #### Address #### Phone (407) 743-8726 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Ready to Price Cantilever Rack? Call (407) 743-8726 or request a quote and we will start a layout. (407) 743-8726 Tap to Call: 4077438726 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://orlandowarehouseracking.com/#business", "name": "Orlando Warehouse Racking", "alternateName": "Orlando Warehouse Racking - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Central Florida. Free warehouse design consultations, pallet rack installation, and storage optimization services.", "url": "https://orlandowarehouseracking.com", "telephone": "(407) 743-8726", "address": { "@type": "PostalAddress", "streetAddress": "5366 Central Florida Pkwy Unit #260", "addressLocality": "Orlando", "addressRegion": "FL", "postalCode": "32821", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "28.4071853", "longitude": "-81.4487064" }, "areaServed": [ { "@type": "City", "name": "Orlando", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Kissimmee", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Sanford", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Daytona Beach", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Lakeland", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Ocala", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Melbourne", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Winter Haven", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Apopka", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Altamonte Springs", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Winter Park", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Lake Mary", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Clermont", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Ocoee", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "St. Cloud", "containedInPlace": { "@type": "State", "name": "Florida" } } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://orlandowarehouseracking.com/images/logo.png", "sameAs": [ "https://facebook.com/orlandowarehouseracking", "https://linkedin.com/company/orlandowarehouseracking", "https://instagram.com/orlandowarehouseracking" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://orlandowarehouseracking.com/" }, { "@type": "ListItem", "position": 2, "name": "Products", "item": "https://orlandowarehouseracking.com/products" }, { "@type": "ListItem", "position": 3, "name": "Cantilever Rack", "item": "https://orlandowarehouseracking.com/products/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can you supply and install the racking?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. We handle design, supply of new material, and installation by experienced installation crews we schedule and manage. The system is anchored to the floor and fitted with load plaques for the approved configuration." } }, { "@type": "Question", "name": "What type of pallet rack do I need?", "acceptedAnswer": { "@type": "Answer", "text": "Selective teardrop rack is the starting point for mixed SKUs; pushback stores 2–6 pallets deep, LIFO by SKU, while pallet flow serves FIFO and dated stock. Drive-in suits bulk storage with few SKUs, cantilever holds long loads, and carton flow serves case picking. We compare the systems against your pallet mix and picking pattern before you order." } }, { "@type": "Question", "name": "What determines the price of pallet racking?", "acceptedAnswer": { "@type": "Answer", "text": "Price depends on pallet positions, rack height, beam capacity, decking, freight, and installation. Send your pallet size, heaviest load per level, clear height, and building size for a free CAD layout and an itemized quote for new material." } }, { "@type": "Question", "name": "How much weight can pallet rack hold?", "acceptedAnswer": { "@type": "Answer", "text": "There is no single capacity that applies to every rack: beam capacity is rated per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and provide load plaques for the finished configuration." } }, { "@type": "Question", "name": "Will new rack match the racking I already have?", "acceptedAnswer": { "@type": "Answer", "text": "Usually, if the connections match, but teardrop is not universal across manufacturers. Send photos of the upright face, beam connector, and any manufacturer label so we can match new components to your system before quoting the addition." } } ] } ] ```